SCBA & SAR (Self-Contained Breathing Apparatus) (Supplied Air Respirator)

• Perform an Annual Inspection & Flow Test with the Posi-Chek Dynamic Test device.
• General cleaning & inspection in accordance with OSHA, NFPA, and ANSI standards
• Leak-testing
• Low Air Alarm disassembly and repair
• Hose, gauge, and strap inspection,testing, and/or replacement
• Air Cylinder Inspection, Filling &Hydro-Testing
• Regulator (First & Second Stage) disassembly and repair
• Cylinder valve disassembly and repair
• Facepiece disassembly and repair
• Overhaul regulator
• Perform NFPA upgrades to regulators, face-pieces, and harnesses

(PAPR) Powered Air-Purifying Respirator

• Flow Test
• Battery Check & Replacement
• CBRN Filter Replacement
• (APR) Air-Purifying Respirator
• NIOSH CBRN compliant retrofits
• Inspect and replace inhalation/exhalation valves
• Install speech diaphragms
• Install drinking tubes
• Inspect and replace CBRN Filters
• Clean and Sanitize

(GMIC) Gas Mask Integrity Check

• This test is performed on a PMLT (Protective Mask Leakage Tester) and checks the individual components of the mask for minute leaks. These components include the mask seal, exhalation valve, drink tube, drink train and inhalation check valve.
• These tests are performed at your location.

Air Cylinder

• Cylinder Refill-Cylinders are refilled with grade A breathing air. (Our air Certification is available upon request)
• Valve is inspected for leaks and the customer is notified if any repairs are needed.
• Cylinder Overhaul - Cylinder is hydrostatically tested.
• Cylinder is cleaned and filled with grade A breathing air.
• Valve components are inspected and replaced (when necessary).

Air Cascade services

• We can provide air cascades to your work location or project site; from one cylinder to sixteen at a time.