Scotch-Brite™ 7100016915 Satin Pleated Buff Wheel, 14 in Dia Wheel x 2 in THK Wheel, 1-1/4 in Center Hole, Very Fine Grade
MFR #: 7100016915
A&M #: 5143383
3M
UNSPSC #: 23131500
$74.23 / EACH
Regular Price: $85.32, you save $11.09 (13%)Out of Stock.This item has been discontinued by the manufacturer. Please request a quote or call 800.864.2660 for help identifying a suitable substitution.
- See all product specifications
Manufacturer : 3M
Abrasive Material : Aluminum Oxide
Brand Name : Scotch-Brite™
Buff Type : Pleated
Center Hole Size : 1-1/4 in
Country Of Origin : US
Package Description : 1/WH
Standards : OSHA 29 CFR 1910.1200
Product Status : Discontinued
- Minimizes need for cleaning chemicals and pastes
- Open web is load resistant to minimize clogging and prolong abrasive service life
- Scotch-Brite™ satin pleated buff wheel has pleated abrasive flaps designed to produce a soft satin finish on most metals. Scotch-Brite™ satin pleated buff wheel was designed with pleated non-woven flaps attached to a steel or fiberglass core in a wave-like pattern. It can lightly finish, deburr and blend on most metals. The benefits of a pleated design are twofold. First, the spacing between the pleated layers ventilates the abrasive as it finishes. Air circulates between the layers, helping the abrasive run cool. Second, the wavy pattern decreases the potential for streaks. Other stacked discs have a slight gap between them, but the springy layers of pleated abrasive curve and undulate to ensue no gaps. Lines or traces that may result from stacked discs are eliminated. The fibrous layers on the wheel respond to surface irregularities and conform to contours - to help maintain part geometry. Available in fine (FIN) or very fine (VFN) grades, the Scotch-Brite™ satin pleated buff wheel will deliver a fine satin finish on most metals and is commonly used on builder's hardware, such as faucet fixtures. Non-woven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life. Scotch-Brite™ products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes and replacing wire brushes that can break off and cause injury. From aesthetic finishing to deburring and more, Scotch-Brite™ abrasives work fast and deliver consistent results, part after part.