main | Iscar | Milling Inserts

Milling Inserts

FILTER

: Stocked Items Only
: 1204PDR-FW IC830 (1)
1806PDR-FWE IC830 (1)
1806PDR-FWR IC830 (1)
3M AXKT 1304PDR IC328 (1)
3M AXKT 200616R-PDR IC928 (1)
3M AXKT 2006PDTR IC328 (1)
ADCR 1505PDFR IC928 (1)
ADCT 1505PDFR-HM IC928 (1)
ADKR 1505PDR-HM IC28 (1)
ADKT 1505 PD-R-HM IC50M (1)
: Iscar (2433)
: 0.06 in (1)
0.071 in (5)
0.409 in (1)
76 (21)
88 (1)
8M (2)
AEN (1)
AER (1)
AETN (1)
AFTN (1)
: 0.002 in (1)
0.0039 in (3)
0.0059 in (5)
0.006 in (1)
0.0063 in (2)
0.0079 in (29)
0.008 in (3)
0.0087 in (2)
0.009 in (1)
0.0098 in (7)
: IL (2114)
IS (58)
IT (16)
KR (1)
: Al2O3/TiAlN (24)
AlTiCrN/TiN (113)
AlTiN (93)
AlTiN/TiAlN/TiN Coated (3)
AlTiN/TiAlSiN/TiSiN (64)
AlTiN/TiN (255)
AlTiN/TiN Coated (8)
AlTiN/TiN/TiAlN (2)
Bright/Uncoated (11)
CVD-TiCN Coated (4)
: Ambidextrous (24)
Left (19)
Neutral (168)
Right (619)
Right Hand (61)
Right/Left (22)
: 0.031 in (2)
0.071 in (1)
0.1575 in (1)
0.1969 in (1)
0.386 in (1)
0.484 in (1)
0.5315 in (1)
0.591 in (3)
0.75 in (1)
0.866 in (5)
: 1204PDR-FW IC830 (1)
1806PDR-FWE IC830 (1)
1806PDR-FWR IC830 (1)
3M AXKT 1304PDR (1)
3M AXKT 1304PDR IC908 (1)
3M AXKT 1304PDR-MM IC928 (1)
3M AXKT 200616R-PDR (1)
3M AXKT 200624R-PDR IC928 (1)
3M AXKT 2006PDTR (1)
3M AXKT 2006PDTR IC910 (1)
: 0.0059 in (1)
0.039 in (1)
0.0630 in (2)
0.079 in (2)
0.1060 in (2)
0.11 in (2)
0.1189 in (1)
0.1260 in (1)
0.155 in (2)
0.1551 in (2)
: 0.38 (2)
0.5 (11)
0.62 (11)
0.75 (12)
05T312 (3)
0702PN (2)
07T3 (7)
09T306 (1)
09T320 (4)
1 (11)
: ACCT (8)
ACKT (19)
ADCR (9)
ADCT (16)
ADKR (15)
ADKT (126)
ADKW (8)
ADMM (1)
ADMT (4)
ANCR (4)
: 0 deg (41)
11 deg (25)
120 deg (7)
135 deg (94)
15 deg (27)
20 deg (11)
25 deg (1)
360 deg (4)
42 deg (2)
45 deg (25)
: 0.091 in (1)
0.098 in (1)
0.13 in (1)
0.138 in (1)
0.144 in (2)
0.146 in (2)
0.157 in (4)
0.1600 in (1)
0.1610 in (1)
0.163 in (4)
: DT7150 (25)
IB85 (7)
IC07 (9)
IC08 (39)
IC20 (36)
IC250 (19)
IC28 (100)
IC308 (1)
IC30N (12)
IC328 (252)
: Carbide (333)
Ceramic (1)
Cermet (1)
Solid Carbide (2035)
: Aluminum (1)
Aluminum/Non-Ferrous (1)
Aluminum/Non-Ferrous Materials (127)
Aluminum/Stainless Steel/High Temperature Alloys (1)
Austenitic Stainless Steel, Titanium and High Temperature Alloys (1)
Austenitic Stainless Steel/Titanium/High Temperature Alloys (1)
Cast Iron (43)
Cast Iron, Hard Steel and Hardened Cast Iron (6)
Cast Iron/Hard Material (1)
Cast Iron/Hard Material/Stainless Steel/Steel/Super Alloys/Titanium (9)
: C1, C2, C3, C5, C6, P, K (1)
C1, C2, C3, C5, C6, P, M, K (1)
C1, C2, C5, C6, P, M, S (2)
C1, C2, C6, C7, H, K, M, P, S (2)
C2, C3, C4, H, K, M, P, S (1)
C2, C3, C5, C6, P, M, S (11)
C2, C3, C6, P, K (2)
C3/C2 (1)
C3/C5/C6/C1 (1)
C3/C5/C6/C2 (14)
: ISCAR-"Bone Shaped" Inserts with 4 Cutting Edges for Fast Feed Milling (6)
ISCAR-.5-1.0" ball nose precision profiling inserts. Two effective flutes, used for shallow finishing. (7)
ISCAR-11° Positive Triangular Milling Inserts for General Use (25)
ISCAR-12-20 mm ball nose precision profiling inserts. (7)
ISCAR-220° Spherical Profile Inserts for Accurate Finishing, Up and Down Ramping and Undercutting (11)
ISCAR-220° Spherical Profile Inserts for Roughing and Semi-Finishing, Up and Down Ramping and Undercutting (21)
ISCAR-30-50 mm diameters ball nose profiling inserts. (3)
ISCAR-45° Octagonal Milling Insert (4)
ISCAR-73° Rhombic, 7° Positive Flank Inserts for Plungers (1)
ISCAR-80° Double-Sided and Double-Positive Inserts with a Positive Rake for Medium Machining on Alloyed Steel (1)
: Flat (54)
Negative (56)
Positive (236)
: 16Mill (7)
3M AXKT 1304 (9)
3M AXKT 1304-R-PDRMM (7)
3M AXKT 2006-R-PDR (2)
3M AXKT-2006 (10)
ADCT 1505PDFR-HM (2)
ADKR 1505PDR/L (10)
ADKT 1505-FF (3)
ADKT 1505-R/L-HM (20)
ADKT 1505ADR (2)
: 80 deg Trigon (6)
82 deg Parallelogram (3)
85 deg Parallelogram (104)
Ball Nose (4)
Ball Nose Round Tip (4)
Bone (19)
Butterfly (17)
Diamond (8)
Hexagon (103)
Irregular (11)
: 0.043 in (2)
0.059 in (2)
0.063 in (2)
0.079 in (3)
0.08 in (2)
0.083 in (4)
0.0830 in (2)
0.087 in (9)
0.0870 in (2)
0.09 in (2)
: 16 Cutting Edges (12)
2 Cutting Edges (75)
2 Helical Cutting Edges (26)
3 Helical Cutting Edges (75)
3-Helical Cutting Edge (3)
4 Cutting Edges (1)
4-Cutting Edge (1)
4-Cutting Edge Double Sided (3)
4-Cutting Edge Tangentially Clamped (6)
4-Helical Cutting Edge (1)
: 0.02 in (30)
0.0630 in (2)
0.106 in (8)
0.1060 in (2)
0.1189 in (1)
0.126 in (1)
0.1260 in (1)
0.16 in (3)
0.1600 in (1)
0.1610 in (1)