Kukko 15-5, Separator 1 3/16" (30mm) to 9 7/8" (250mm) opening
Together with the pullers of series 18 for pulling off ball bearings, roller bearings, inner rings and other flush-mounted parts in craftsmanship, industry and workshop.
MFR #: 15-5
A&M #: 7075224
Kukko
UNSPSC #: 27111712
$2,014.00 / ea
Typically ships within 7-10 days.
Manufacturer : Kukko
Brand Name : Kukko
Country Of Origin : DE
Package Weight : 40.79 lb
Package Description : 1/EA
Product Status : Active
- The sharp cutting edges enable pulling where other types of pullers are inapplicable
- By bolting the separator and puller, the highest stability is ensured during pulling
- If the separating jaws are screwed into the puller the other way around, the contact surface is enlarged and it is pulled off more gently.
- Operation: 1) Press the sharp cutting edges of the pulling device behind the part, 2) Tighten the separating jaws using the pressure spindle by evenly tightening the adjusting nuts on the side bolts of the pulling device and ensure that the separating knife are seated under the part to be pulled up to the stop, 3) Screw the side screw of the puller into the threaded holes of the pulling device up to the stop, and 4) Hold the pulling device firmly and pull off the relevant part safely and carefully by tightening the clamping nut
- The pulling devices of series 15 are used together with the pullers of series 18 for pulling ball bearings, roller bearings, inner rings and other parts with a flat contact surface in crafts, industry and workshops when there is not enough space for pulling jaws. The separation-pulling process is capable of first separating those parts gently before they can be pulled off from the outside.