Kukko 15-C, Separator Set with Pulling Device. 1" (25mm) to 6 1/8" (155mm) opening
For pulling off ball bearings, roller bearings, inner rings and other plane-mounted parts in crafts, industry and workshop.
MFR #: 15-C
A&M #: 7075227
Kukko
UNSPSC #: 27111712
$1,382.00 / ea
Typically ships within 7-10 days.
Manufacturer : Kukko
Brand Name : Kukko
Country Of Origin : DE
Package Weight : 37.46 lb
Package Description : 1/EA
Product Status : Active
- Application-oriented compilation for universal use
- By storing them in the box, the completeness of the set can be easily viewed.
- The sharp edges enable pulling where other pulling methods are not applicable.
- By screwing the separator and puller, the highest stability during pulling is ensured.
- If you screw the separating jaws into the puller the other way around, the contact surface is enlarged and pulled off more gently.
- Operation: 1) Press the sharp edges of the separator behind the part. 2) Use the tension spindle to tighten the side bolts of the separator evenly, making sure the separating knives are fully seated beneath the part being pulled off. 3) - Screw the side screw of the puller into the threaded holes of the separator until it stops. and 4) Hold the separator and carefully pull off the part by tightening the clamping nut securely.
- The 4-piece separator set 15-C is used for pulling ball bearings, roller bearings, inner rings, and other flush-mounted parts in crafts, industry, and workshops when there is not enough room for pulling jaws. The separator-pulling process is capable of initially separating those parts gently before they can be externally extracted. This 4-piece set includes a separating and pulling device as well as a pair of extensions, ensuring the full range of applications.