Epoxy & Structural Adhesives

FILTER

: Stocked Items Only
: Acrylic (27)
Epoxy (54)
Magnesium Phosphate (6)
Methyl Methacrylate (4)
Polyurethane (9)
Silicone (8)
Urethane (1)
Urethane/Polyurethane (1)
: Loctite® (174)
: Amber (17)
Amber/Black/Dark Brown (1)
Amber/Clear (2)
Amber/Gray (1)
Amber/Gray/Tan/White (2)
Amber/Off-White/Red (1)
Amber/Orange (2)
Amber/Translucent (1)
Beige/Dark Amber (2)
Black (13)
: Aluminum Hydroxide, Epichlorohydrin-4,4'-Isopropylidene Diphenol Resin Oxirane, Mono[(C12-14-Alkyloxy)Methyl] Derivates, Carbon Black (1)
Aluminum Hydroxide, Glyceridic Oil, Zeolites, Titanium Dioxide (1)
Aluminum Hydroxide, Polymercaptan Hardener, Substituted Aminophenol, Styrene, Silica, Amorphous, Fumed, Crystal Free, Ethylene Glycol, Substituted Aminophenol, Benz(A)Anthracene (1)
Aluminum Oxide, Calcium Carbonate, 2-Ethylhexyl Glycidyl Ether, Carbon Black, Quartz (SiO2) (1)
Amine Adduct, Tetraethylenepentamine, Triethylenetetramine (2)
Aromatic Methacrylate Ester, Methacrylic Acid, Resin, Tert-Butyl Perbenzoate, Silica, Amorphous, Fumed, Crystal Free, Methacrylate Monomer (1)
Aromatic Methacrylate Ester, Methacrylic Acid,Resin, Tert-Butyl Perbenzoate, Silica, Amorphous, Fumed, Crystal Free, Methacrylate Monomer (1)
Calcium Carbonate, Epoxy Resin Limestone, Butyl 2,3-Epoxypropyl Ether, Quartz (SiO2), Carbon Black (1)
Calcium Carbonate, Limestone, Butyl 2,3-Epoxypropyl Ether, Quartz (SiO2), Carbon Black (1)
Di(2-Ethylhexyl)Phthalate, 4-Nonylphenol, Branched, Substituted Piperazine, Triethylenetetramine, Substituted Amine, Diethylenetriamine, Substituted Piperazine (1)
: 0.12 oz (1)
1 L (11)
1 gal (9)
1 lb (7)
1 oz (2)
1 qt (2)
1.2 oz (1)
10 lb (3)
10 mL (1)
17 lb (1)
: Bottle (14)
Can (8)
Cartridge (19)
Dual-Cartridge (70)
Foil Pouch (1)
Kit (29)
Mixer Cup (2)
Pail (14)
Stick (3)
Syringe (7)
: US (167)
: 1 hr (2)
10 min (4)
10 s (1)
12 hr (2)
16 hr (2)
2 hr (1)
20 min at 25 deg C (1)
24 hr (117)
25 min (1)
30 min (3)
: Alnico, Ferrite and Neodymium Metal (5)
Aluminum and Steel (1)
Aluminum, Epoxy Coated Metals, Plastic, SMC, Stainless Steel and Steel (1)
Ceramic and Metal (1)
Ceramic, Concrete, Fiberboard, Glass, Masonry, Metal, Plastic, Rubber and Wood (1)
Ceramic, Concrete, Glass, Metal and Wood (1)
Ceramic, Concrete, Glass, Metal, Plastic and Wood (1)
Ceramic, Concrete, Masonry, Metal and Plastic (2)
Ceramic, Fabric, Glass, Metal and Plastic (1)
Ceramic, Ferrite, Metal, Plastic and Wood (5)
: 10 min (3)
12 to 15 min (2)
15 min (10)
15 to 20 min (1)
2 hr (1)
20 s (2)
25 min (1)
3 hr (27)
3 min (1)
3 to 11 min Initial/15 to 22 min Final (5)
: Concrete Repair Flooring (1)
: 100:11.6 By Volume/100:6.9 By Weight (2)
10:1 (6)
10:3 (1)
1:1 (53)
1:2 (4)
1:3.01 (1)
1:4.81 (1)
1:5 (5)
1:5.2 (2)
2.5:1 (3)
: 0.02 lb (2)
0.11 lb (5)
0.12 lb (1)
0.15 lb (2)
0.16 lb (3)
0.17 lb (8)
0.18 lb (1)
0.19 lb (4)
0.2 lb (3)
0.21 lb (2)
: Loctite® 3035™ 2-Part Structural Adhesive, Pale Yellow, 24 hr Curing (2)
Loctite® AA 392™ General Purpose High Performance Structural Adhesive, Beige/Dark Amber, 24 hr Curing (2)
Loctite® AA H3000™ Speedbonder™ 2-Part General Purpose High Strength Low Viscosity Structural Adhesive, Opaque/Tan/White, 24 hr Curing (2)
Loctite® AA H3300™ Speedbonder™ 2-Part General Purpose High Performance Ultra Fast Cure Structural Adhesive, Light Yellow/Tan/Yellow, 24 hr Curing (3)
Loctite® Fixmaster® 3472™ 2-Part Pourable Steel Liquid, Blue/Gray, 6 hr Curing (3)
Loctite® Fixmaster® PC 9416™ 3-Part Semi-Pourable Floor Fill, Amber/Gray/Tan/White, 24 hr Curing (2)
Loctite® H8100™ Speedbonder™ 2-Part General Purpose Non-Sag Structural Adhesive, Blue/Opaque/Yellow, 24 hr Curing (1)
Loctite® Hysol® 1C™ 2-Part High Performance Epoxy Adhesive, Off-White/Green, 24 hr Curing (2)
Loctite® Hysol® 3140™ 1-Part General Purpose Epoxy Resin, Black, 16 hr Curing (2)
Loctite® Hysol® 3145™ Epoxy Resin, Black, 24 hr Curing (1)
: 3035™ (2)
324™ Speedbonder™ (2)
325™ Speedbonder™ (1)
326™ Speedbonder™ (2)
332™ (2)
334™ (1)
3412™ (1)
3414™ Speedbonder™ (1)
3463™ (2)
3472™ (3)
: -15 to 115 deg F (2)
-40 to 450 deg F (1)
-65 to 180 deg F (2)
-65 to 250 deg F (2)
-65 to 250 deg F Operating/46.4 to 82.4 deg F Storage (2)
-65 to 300 deg F (8)
-65 to 300 deg F Operating/46.4 to 69.8 deg F Storage (1)
-65 to 350 deg F (6)
120 deg F (1)
130 deg F (4)
: 1-Part (5)
1-Part Fast Fixture (2)
1-Part General Purpose (3)
1-Part General Purpose High Performance (1)
1-Part General Purpose High Viscosity (3)
1-Part General Purpose Ultra Fast Cure (2)
1-Part High Impact (1)
1-Part High Performance (2)
1-Part High Strength (1)
1-Part High Strength Non-Sag Temperature Resistant (1)
: 0.0004 (1)
0.00589 (1)
0.0059 (1)
0.0169 (2)
0.05 g/L Part A, 0.57 g/L Part B (1)
0.0572 (1)
0.1% Part A (1)
0.13 g/L Part A, 0.57 g/L Part B (2)
0.24 g/L (1)
0.3 % (1)
: 1 min (1)
1.5 hr (1)
10 min (7)
120 min (3)
15 min (6)
2 hr (1)
20 min (13)
20 to 40 min (1)
25 min (4)
3 hr (1)