main | Micro 100 | Drill Mills

Drill Mills

FILTER

: Stocked Items Only
: MICRO 100® (54)
: US (54)
: Right Hand (54)
: 0.125 in (6)
0.1875 in (5)
0.25 in (6)
0.3125 in (7)
0.375 in (7)
0.5 in (6)
0.625 in (4)
0.75 in (5)
10 mm (2)
16 mm (2)
: AlTiN (28)
Uncoated (26)
: Helical (54)
: 0.5 in (6)
0.625 in (5)
0.75 in (6)
0.813 in (7)
1 in (13)
1.25 in (4)
1.5 in (5)
11 mm (1)
13 mm (2)
25 mm (2)
: Solid Carbide (54)
: 2 (25)
4 (29)
: 1.5 in (6)
104 mm (1)
2 in (5)
2.5 in (20)
3 in (6)
3.5 in (4)
4 in (5)
50 mm (1)
57 mm (2)
72 mm (2)
: 0.19 in (12)
0.24 in (1)
0.31 in (14)
0.38 in (8)
0.39 in (1)
0.56 in (6)
0.63 in (2)
0.75 in (9)
0.79 in (1)
: 1.56 in (6)
2.24 in (2)
2.31 in (6)
2.5 in (20)
2.84 in (2)
3 in (6)
3.5 in (4)
3.62 in (2)
4 in (5)
4.09 in (1)
: 0.01 lb (6)
0.02 lb (4)
0.03 lb (2)
0.05 lb (4)
0.06 lb (4)
0.08 lb (3)
0.09 lb (4)
0.11 lb (3)
0.12 lb (4)
0.15 lb (1)
: 0.19 in (12)
0.24 in (1)
0.31 in (14)
0.38 in (8)
0.39 in (1)
0.56 in (6)
0.63 in (2)
0.75 in (9)
0.79 in (1)
: 120 deg (26)
90 deg (28)
: Drill (54)
: 0.125 in (6)
0.188 in (5)
0.25 in (6)
0.312 in (7)
0.375 in (7)
0.5 in (6)
0.625 in (4)
0.75 in (5)
10 mm (2)
16 mm (2)
: Cylindrical (54)

Sort by

Results Per Page

54 items

content loaded

MICRO 100® DM-125-2120X Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (2) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

Compare

MICRO 100® DM-125-2120X Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (2) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

MFR #: DM-125-2120X

A&M #: 5127444

Micro 100

Call for Price

MICRO 100® DM-125-290X Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (2) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

Compare

MICRO 100® DM-125-290X Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (2) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

MFR #: DM-125-290X

A&M #: 4661561

Micro 100

Call for Price

MICRO 100® DM-125-4120 Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, Uncoated

Compare

MICRO 100® DM-125-4120 Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, Uncoated

MFR #: DM-125-4120

A&M #: 5127445

Micro 100

Call for Price

MICRO 100® DM-125-4120X Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

Compare

MICRO 100® DM-125-4120X Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

MFR #: DM-125-4120X

A&M #: 5127446

Micro 100

Call for Price

MICRO 100® DM-125-490 Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, Uncoated

Compare

MICRO 100® DM-125-490 Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, Uncoated

MFR #: DM-125-490

A&M #: 5122944

Micro 100

Call for Price

MICRO 100® DM-125-490X Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

Compare

MICRO 100® DM-125-490X Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

MFR #: DM-125-490X

A&M #: 5122945

Micro 100

Call for Price

MICRO 100® DM-187-2120 Drill/End Mill, 0.1875 in Dia, 120 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, Uncoated

Compare

MICRO 100® DM-187-2120 Drill/End Mill, 0.1875 in Dia, 120 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, Uncoated

MFR #: DM-187-2120

A&M #: 5127489

Micro 100

Call for Price

MICRO 100® DM-187-2120X Drill/End Mill, 0.1875 in Dia, 120 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, AlTiN

Compare

MICRO 100® DM-187-2120X Drill/End Mill, 0.1875 in Dia, 120 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, AlTiN

MFR #: DM-187-2120X

A&M #: 5127490

Micro 100

Call for Price

MICRO 100® DM-187-290X Drill/End Mill, 0.1875 in Dia, 90 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, AlTiN

Compare

MICRO 100® DM-187-290X Drill/End Mill, 0.1875 in Dia, 90 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, AlTiN

MFR #: DM-187-290X

A&M #: 5122954

Micro 100

Call for Price

MICRO 100® DM-125-2120X Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (2) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

Compare

MICRO 100® DM-125-2120X Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (2) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

MFR #: DM-125-2120X

A&M #: 5127444

Micro 100

Call for Price

MICRO 100® DM-125-290X Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (2) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

Compare

MICRO 100® DM-125-290X Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (2) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

MFR #: DM-125-290X

A&M #: 4661561

Micro 100

Call for Price

MICRO 100® DM-125-4120 Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, Uncoated

Compare

MICRO 100® DM-125-4120 Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, Uncoated

MFR #: DM-125-4120

A&M #: 5127445

Micro 100

Call for Price

MICRO 100® DM-125-4120X Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

Compare

MICRO 100® DM-125-4120X Drill/End Mill, 0.125 in Dia, 120 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

MFR #: DM-125-4120X

A&M #: 5127446

Micro 100

Call for Price

MICRO 100® DM-125-490 Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, Uncoated

Compare

MICRO 100® DM-125-490 Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, Uncoated

MFR #: DM-125-490

A&M #: 5122944

Micro 100

Call for Price

MICRO 100® DM-125-490X Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

Compare

MICRO 100® DM-125-490X Drill/End Mill, 0.125 in Dia, 90 deg Point Angle, (4) Flutes, 0.5 in Length of Cut, 0.125 in Dia Shank, 1.5 in OAL, AlTiN

MFR #: DM-125-490X

A&M #: 5122945

Micro 100

Call for Price

MICRO 100® DM-187-2120 Drill/End Mill, 0.1875 in Dia, 120 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, Uncoated

Compare

MICRO 100® DM-187-2120 Drill/End Mill, 0.1875 in Dia, 120 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, Uncoated

MFR #: DM-187-2120

A&M #: 5127489

Micro 100

Call for Price

MICRO 100® DM-187-2120X Drill/End Mill, 0.1875 in Dia, 120 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, AlTiN

Compare

MICRO 100® DM-187-2120X Drill/End Mill, 0.1875 in Dia, 120 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, AlTiN

MFR #: DM-187-2120X

A&M #: 5127490

Micro 100

Call for Price

MICRO 100® DM-187-290X Drill/End Mill, 0.1875 in Dia, 90 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, AlTiN

Compare

MICRO 100® DM-187-290X Drill/End Mill, 0.1875 in Dia, 90 deg Point Angle, (2) Flutes, 0.625 in Length of Cut, 0.188 in Dia Shank, 2 in OAL, AlTiN

MFR #: DM-187-290X

A&M #: 5122954

Micro 100

Call for Price

Results Per Page