Mitutoyo America Corporation

FILTER

: Stocked Items Only
: Angle Blocks & Sets (3)
Bar, Pipe & L Clamps (1)
Bore Gages (89)
Caliper & Gage Sets (1)
Caliper Accessories (5)
Caliper Gages (54)
Center Gages (1)
Centering & Marking Punches (2)
Combination Square Accessories (1)
Combination Square Blades (2)
: (0.5+L/100) um (1)
+/-(0.00012+0.00005n+(0.00004xR/2)) in (5)
+/-(0.00024+(0.00004xR/2)) in (1)
+/-(2+R/75) um (20)
+/-(3+n+L/50) um (6)
+/-(6+L/50) um (2)
+/-0.00004 in, 0.00002 in (1)
+/-0.00005 in (13)
+/-0.00005 in Block Pitch (2)
+/-0.00005 in Block Pitch, 0.00004 in Micrometer Head (1)
: 1 to 30 deg (1)
1/4 to 30 deg (1)
30/60/90 deg (1)
59 deg (1)
: 15 deg Point (23)
30 deg Point (22)
60 deg V-Anvil (20)
60 deg/55 deg V-Anvil/Interchangeable (33)
Blade (5)
Curved (1)
Cylindrical (10)
Flat (51)
Interchangeable (53)
Interchangeable/Ball (20)
: 0.0118 to 0.6299 in (0.0001 in Interval), 0.3 to 16 mm (0.01 mm Interval) (1)
: 0.06 in (1)
0.079 in (2)
: Hardened Steel (1)
: 2.95 in (1)
: 0.47 in (1)
: 100 mm (4)
1000 mm (1)
1200 mm (1)
135 mm (8)
149 mm (2)
180 mm (12)
2-1/2 in (1)
237 mm (2)
250 mm (10)
260 mm (2)
: 1-7/8 in (1)
110 mm W x 110 mm D (1)
150 mm W x 150 mm D (1)
155 mm W (1)
2 in H x 6 in W x 8 in D (4)
2 in H x 8 in W x 12 in D (5)
30 mm Dia x 25 mm H (1)
32 mm H (1)
40 mm H (1)
45 mm H x 168 mm W (1)
: SR44 (1)
: CR2032 (1)
SR44 (20)
: 1150 mm (7)
185 mm (2)
220 mm (10)
235 mm (2)
270 mm (10)
287 mm (2)
320 mm (10)
420 mm (12)
570 mm (8)
750 mm (7)
: 3.5 mm (6)
3.8 mm (42)
: 150 mm (1)
18 in (1)
: Stainless Steel (2)
: 12 in (1)
137 mm (1)
150 mm (1)
300 mm (1)
6 in (1)
6.18 in L x 0.55 in W x 0.05 in THK (2)
: Mitutoyo (9200)
: 1/16 to 1/2 in Dia (1)
1/16 to 24 in Dia (1)
: 0.157 to 0.394 in Dia (2)
4 to 10 mm Dia (2)
: Black (8)
Black Chrome (9)
Black/Chrome (70)
Gray (2)
Hammerton/Green (15)
Light Gray (1)
: Contact (1)
Contact/Non-Contact (1)
: 0.5 in (1)
1 in (1)
: A (2)
B (21)
C (6)
Chisel/PR (1)
Chisel/R/S (4)
Chisel/S (2)
K/K (5)
KK (1)
Needle (1)
PR (1)
: CN (2)
IN (4)
JP (1113)
US (22)
: 0.003 in, 0.01 in, 0.03 in, 0.1 in, 0.3 in (1)
: 1.24 in (2)
: Black (1)
Silver (3)
White (21)
Yellow (9)
: +/-0 to 100 (1)
0 to 100 (7)
0 to 15 to 0 (4)
0 to 25 to 0 (1)
0 to 30 (1)
0 to 4 to 0 (2)
0 to 40 to 0 (1)
0 to 5 to 0 (1)
0 to 50 (1)
0 to 50 to 0 (4)
: 1-1/2 in (2)
1.5748 in Dia (1)
144 mm H x 56 mm W x 33.5 mm D (5)
151 mm H x 60 mm W x 28.5 mm D (5)
186 mm H x 56 mm W x 33.5 mm D (2)
193 mm H x 60 mm W x 28.5 mm D (2)
40 mm (4)
50 mm Dia (1)
57 mm (5)
78 mm (3)
: 1.8 in (1)
2.4 in (1)
45 mm (2)
5.5 mm (2)
60 mm (2)
8.5 mm (1)
: 0.51 in Dia (1)
0.59 in Dia (1)
0.61 in Dia (1)
0.79 in W x 0.34 in D (1)
1 mm Dia x 1.20 in L (1)
1.14 in Dia (2)
1/2 in Dia (1)
1/5 in Dia (1)
10 mm Dia x 15 mm L (1)
10.87 in L x 22 in W x 52 in H (2)
: 5-Digit 0.47 H LCD (2)
5.7 in LCD (1)
6-Digit LCD (9)
6-Digit LED (1)
7-Digit 11 mm LCD (14)
Analog (52)
Backlit LCD (1)
Dial Indicator (9)
Digimatic IDC (1)
Digimatic IDC/LCD (3)
: 10X (5)
: Baked Enamel Coated (115)
Black Oxide (3)
Chrome/Micro Lapped (1)
Micro Lapped (41)
Micro-Lap (1)
Natural (2)
Oxide Treated (1)
Plain (2)
Satin Chrome (301)
Satin Chrome Frame (1)
: 0.248 in (1)
0.4 in (1)
10 mm (2)
: 215.9 mm (1)
: 10.6 x 9.4 in (1)
14.5 x 9.4 in (1)
90 mm (1)
: ASME 0 (1154)
ASME 00 (1123)
ASME 1 (89)
ASME 2 (87)
ASME AS-1 (1061)
ASME AS-2 (1025)
ASME K (804)
BS 0 (5)
BS 1 (1)
BS 2 (2)
: 0.00001 in (2)
0.0002 mm (2)
0.002 mm (3)
: 0.000005 in (1)
0.00001 in (6)
0.00005 in (5)
0.00005 in, 0.001 mm (5)
0.00005 in/0.001 mm (1)
0.0001 in (83)
0.0001 in, 0.01 mm (7)
0.0001 in/0.001 mm (7)
0.0001 mm (5)
0.0002 in (43)
: 0.027 in (1)
0.09 in (1)
0.19 in (1)
0.26 in (2)
0.31 in (8)
0.7 mm (1)
2.3 mm (1)
5 mm (1)
5.2 mm (1)
7 mm (5)
: 0.023 in (1)
0.032 in (1)
0.06 in (11)
0.4 mm (1)
0.6 mm (1)
0.8 mm (1)
1.2 mm (10)
2-1/2 in (2)
3.3 in (1)
3.5 mm (5)
: Hardened Steel (1)
: Knurled Grip (1)
T-Handle (4)
: HRC 55 (3)
: 25 mm (2)
30 mm (1)
: Telecentric Transmitted/Koehler Reflected (4)
: (1) 1 in, (1) 2 in, (1) 4 in, (1) 8 in and (3) 12 in Extension Rods (1)
(1) 1 in, (1) 2 in, (1) 4 in, (2) 8 in and (3) 16 in Extension Rods (1)
(1) 1 in, (1) 2 in, (2) 4 in, (1) 8 in and (1) 12 in Extension Rod (1)
(1) 1/2 in, (1) 1 in, (2) 2 in and (1) 4 in Extension Rods (1)
(1) 103-177, 103-178 and 103-179 Outside Micrometers and (2) Micrometer Standards (1)
(1) 103-177, 103-178, 103-179 and 103-180 Outside Micrometers and (3) Micrometer Standards (1)
(1) 13 mm, (1) 25 mm, (2) 50 mm and (1) 100 mm Extension Rods (2)
(1) 13 mm, (1) 25 mm, (2) 50 mm, (1) 100 mm and (1) 200 mm Extension Rods (2)
(1) 13 mm, (1) 25 mm, (2) 50 mm, (1) 100 mm, (2) 200 mm and (1) 300 mm Extension Rods (2)
(1) 13 mm, (1) 25 mm, (2) 50 mm, (1) 100 mm, (3) 200 mm and (2) 300 mm Extension Rods (2)
: 1.57 in (1)
1.5748 in (1)
1.58 in (1)
1.9685 in (1)
100 mm (25)
12 mm (7)
130 mm (3)
140 mm (7)
150 mm (18)
16 mm (4)
: 2.36 in (1)
: 80 mm (1)
: 0.004 in (5)
0.005 in (5)
0.006 in (5)
0.007 in (5)
0.008 in (5)
0.009 in (5)
0.01 in (9)
0.011 in (5)
0.012 in (5)
0.013 in (5)
: Incandescent (1)
: 132 lb (1)
150 N (1)
600 N (2)
: 2000X (4)
6.4 to 40X (1)
8x (3)
: 8X to 16X (1)
: 13.7 kg (1)
15.4 lb (2)
16.2 kg (1)
16.5 lb (2)
24 kg (1)
: ABS (2)
ABS Resin (2)
Alloy Steel (1)
Alloy Steel Point (8)
Aluminum Frame (2)
Brass (1)
Carbide (8)
Carbide Tip (475)
Carbide Tip Face (2)
Carbon Fiber (34)
: 0.4 to 0.7 N (1)
</=1.5 N (1)
</=1.8 N (3)
</=2 N (10)
</=2.5 N (3)
<0.5 N (1)
<0.7 N (1)
<0.9 N (1)
<1.8 N (1)
: #0 to 36 (2)
#1 to 60 (1)
#2-56NC to 1/4-28NF (1)
#61 to 80 (1)
-360 to 360 deg (4)
0 to 0.008 in (1)
0 to 0.03 in (1)
0 to 0.05 in (3)
0 to 0.06 in (1)
0 to 0.2 in (1)
: Imperial (123)
Imperial/Metric (134)
Metric (220)
: 0.01 in/s, 0.02 in/s, 0.03 in/s in/0.25 mm/s, 0.5 mm/s, 0.75 mm/s Measurement, 0.04 in/s/1 mm/s in Return (1)
: 1000 mm (1)
18 in (1)
300 mm (2)
450 mm (1)
600 mm (1)
: 1.5 V (1)
: 6 to 99999 rpm (1)
: 10 (1)
17 (1)
18 (2)
21 (1)
22 (1)
25 (1)
26 (2)
28 (3)
30 (4)
32 (3)
: 1 (2)
10 (3)
12 (4)
2 (5)
3 (9)
4 (15)
5 (5)
6 (10)
7 (1)
8 (2)
: 5 (2)
8 (2)
: 1 (1)
6 (2)
: Solid (3)
: Binocular (1)
Binocular/Dual Adjustable Diopter (1)
Monocular (1)
Monocular/Binocular (2)
: 0.98 in (7)
1-1/2 in (1)
1.26 in (6)
1.77 in (5)
10.24 in (1)
112 mm (3)
12.24 in (1)
125 mm (2)
13.27 in (1)
14-1/4 in (1)
: 1174 mm (7)
12 in (1)
209 mm (2)
244 mm (10)
259 mm (2)
294 mm (10)
311 mm (2)
344 mm (10)
4 in (3)
4.3 in (1)
: 0.01 lb (2)
0.02 lb (5)
0.07 lb (9)
0.08 lb (8)
0.09 lb (5)
0.1 lb (5)
0.11 lb (6)
0.12 lb (19)
0.13 lb (5)
0.14 lb (7)
: +/-0.001 in (1)
0.000008 in (10)
0.2 um (10)
1-3/4 to 2-1/4 in (1)
1-5/16 to 1-3/4 in (1)
1/2 to 11/16 in (1)
11/16 to 15/16 in (1)
15/16 to 1-5/16 in (1)
3/8 to 1/2 in (1)
: (2) 938882 SR44 Batteries (6)
(2) SR44 Batteries (2)
120 V AC (1)
120 V AC, 50/60 Hz (5)
938882 SR44 Battery (35)
AC Adapter (1)
AC Adapter/NiMH Rechargeable Battery (1)
Battery (60)
SR44 Battery (315)
SR44 Silver Oxide Cell (5)
: 17.5 mm, 22.5 mm (1)
2.2 in (1)
2.4 in (1)
56 mm (1)
6 in (2)
62 mm (1)
: 1/16 to 5/16 in (2)
1/16 to 5/32 in (1)
1/8 to 3/8 in (1)
: 0.000001 to 0.0005 in (4)
0.000001 to 0.005 in (2)
0.000002 to 0.005 in (3)
0.000005 to 0.005 in (3)
0.00002 in, 0.00005 in, 0.0001 in/0.0005 mm, 0.001 mm (2)
0.00005 in (169)
0.00005 in, 0.0001 in, 0.0005 in/0.001 mm, 0.01 mm (1)
0.00005 in/0.001 mm (3)
0.0001 in (28)
0.0001 in, 0.001 mm (14)
: 183-102 (1)
183-102, 183-106, 183-107, 183-109, 183-113, 183-115 (1)
183-102, 183-106, 183-107, 183-112, 183-113, 183-114 (1)
: 0.394 in (1)
1.181 in (9)
16 mm (1)
22 mm (1)
24.8 mm (1)
28 mm (1)
3/32 in (1)
30 mm (7)
40 mm (2)
50 mm (2)
: 12 in (2)
160 mm (4)
18 in (2)
220 mm (1)
24 in (1)
300 mm (1)
320 mm (2)
385 mm (1)
400 mm (2)
435 mm (1)
: Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv, R3z, Rsk, Rku, Rc, RPc, Rsm, Rz1max, S, HSC, RzJIS, Rppi, Ra, Rq, Rlr, Rmr, Rmr(c), Rc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, a, q, L0, Rpm, tp, Htp, R, Rx, AR, W, AW, Wx, Wte and Possible Customize (1)
: 0.003 in, 0.01 in, 0.03 in, 0.1 in, 0.3 in (1)
: 1 (2)
1 Series (5)
101 (4)
102 (14)
103 (114)
104 (31)
105 (30)
106 (1)
107 (8)
110 (4)
: 1/16 in, 3/32 in, 1/8 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in and 5/16 in Drive Pin Punches (2)
1/16 in, 5/64 in, 3/32 in, 9/64 in and 5/32 in Drive Pin Punches (1)
1/8, 3/16, 1/4, 5/16 and 3/8 in Punches (1)
: Rectangle (4060)
Squared (1466)
: 0.04 in (1)
0.045 in (1)
0.05 in (1)
0.055 in (1)
0.06 in (1)
0.07 in (1)
0.08 in (1)
0.09 in (1)
0.1 in (2)
0.11 in (1)
: #4-48 UNF (3)
#4-48 UNF Thread, 0.118 in Ball Point, 0.3 in L, 0.06 in Radius (1)
+/-0.00001 in Dia, +/-0.00001 in Roundness Tolerance, HRC 59-64, 0.2 mm Pitch, 0.00455 in/0.1155 mm Dia Thread (2)
+/-0.00001 in Dia, +/-0.00001 in Roundness Tolerance, HRC 59-64, 0.225 mm Pitch, 0.00511 in/0.1299 mm Dia Thread (2)
+/-0.00001 in Dia, +/-0.00001 in Roundness Tolerance, HRC 59-64, 0.25 mm Pitch, 0.00568 in/0.1443 mm Dia Thread (2)
+/-0.00001 in Dia, +/-0.00001 in Roundness Tolerance, HRC 59-64, 0.3 mm Pitch, 0.00682 in/0.1732 mm Dia Thread (2)
+/-0.00001 in Dia, +/-0.00001 in Roundness Tolerance, HRC 59-64, 0.35 mm Pitch, 0.00796 in0.2021 mm Dia Thread (2)
+/-0.00001 in Dia, +/-0.00001 in Roundness Tolerance, HRC 59-64, 0.4 mm Pitch, 0.00909 in/0.2309 mm Dia Thread (2)
+/-0.00001 in Dia, +/-0.00001 in Roundness Tolerance, HRC 59-64, 0.45 mm Pitch, 0.01023 in/0.2598 mm Dia Thread (2)
+/-0.00001 in Dia, +/-0.00001 in Roundness Tolerance, HRC 59-64, 0.55 mm Pitch, 0.0125 in Dia/0.3175 mm Thread (2)
: 0.025 in (3)
0.14 in (1)
0.157 in (13)
0.315 in (2)
0.425 in (4)
1/4 in (7)
10 mm (1)
10.8 mm (12)
3.5 mm (7)
3/8 in (1)
: Ball/Interchangeable (20)
Conical (53)
Flanged/Non-Rotating (10)
Flat (176)
Flat/Non-Rotating (12)
Non-Rotating (100)
Pointed (2)
Rotating (31)
SR Spherical (1)
SR1.5 Spherical (2)
: 3 um (1)
6 um (1)
9 um (1)
: 2 um (1)
2.5 um (1)
3.5 um (1)
: Center (1)
Drive Pin (3)
: 1/4 in Dia Anvil/Spindle Micrometer (124)
100mm/4 inch, 150mm/6 inch and 200mm/8 inch calipers (1)
104 Series Outside Micrometer (1)
104 and 340 Series Outside Micrometer (1)
116 Series Universal Micrometer (1)
150 mm Blades (1)
176 Series MF 3X Eyepiece Measuring Microscopes (6)
180-907U Series 180 12 in Combination Square Set (1)
180-XXXB Series Protractor Head (1)
187-552 Digital Universal Protractor and 187-906 Universal Bevel Protractor (1)
: 16.1 x 13.4 in (1)
170 x 230 mm (1)
20.07 x 13.4 in (1)
: 100 x 100 mm (2)
6 x 6.7 x 8.7 in (1)
8 x 6.7 x 8.7 in (1)
: 1/16 to 5/32 in (1)
1/4 to 1/2 in (1)
1/8 to 5/16 in (1)
5/32 to 1/4 in (1)
: 0.28 in (7)
0.39 in (12)
0.5062 in (1)
0.5125 in (1)
0.5187 in (1)
0.59 in (10)
0.79 in (4)
0.98 in (5)
1 in (1)
1-1/2 in (8)
: Friction (15)
Large (7)
Plain (62)
Ratchet (56)
Ratchet Stop (574)
Zero-Adjustable (18)
: 55 deg (2)
60 deg (7)
: #4-48 UNF (2)
: 0.82 in (1)
20 mm (1)
30 mm (4)
4.7 in (1)
: 0.4 mm (1)
0.6 mm (2)
1 mm (22)
1.5 mm (11)
1.6 mm (1)
2 mm (4)
3 mm (5)
6 mm (2)
R0.1 mm (2)
R0.4 mm (1)
: #4-48 UNF (6)
0.1 mm (6)
0.59 in (1)
0.67 in (1)
0.79 mm (8)
M1.7 x 0.35 (2)
M1.7x0.35 (1)
M2.5x0.45 (11)
: +/-0.00006 in (38)
+/-0.0001 in (8)
+/-1.5 um (42)
+/-2.5 um (8)
1.5 um (12)
: 2-Axis (1)
: 1-Gage Single Function (1)
1-Piece Standard (2)
10-Piece Extra Thin Imperial (1)
10-Piece Imperial (10)
10-Piece Imperial Thin (1)
10-Piece Metric (27)
10-Pin Wired (1)
103-Piece Metric (28)
112-Piece (2)
112-Piece Metric (27)
: 0 to 1 in, 1 to 2 in (2)
12 to 40 in (1)
4 in (1)
5 to 12 in (1)
: 1 Year (25)
: 0.95 in (866)
1 in (9)
1-3/16 in (14)
1.181 in (1055)
1.378 in (353)
1/2 in (22)
12 mm (3)
160 mm (1)
18 mm (2)
19 mm (1)
: 2 ft (1)
: 150 mm (2)
8.7 in (2)
89 mm (1)