Reed PEP1IPS7 True Peel, For Use With 98665 1 in IPS DR7 0.188 in Wall Mandrel, 0.009 to 0.012 inch Peel Thickness
Allows for clear observation of the peel removal
MFR #: PEP1IPS7
A&M #: 5554073
Reed Manufacturing
UNSPSC #: 47121800
$352.64 / EACH
Typically ships within 7-10 days.
- See all product specifications
Manufacturer : Reed Manufacturing
Brand Name : Reed
Country Of Origin : US
Dimensions : 2.44 in H x 2-1/4 in W x 6.68 in L
Includes : A protective carrying case
Package Height : 4 in
Package Description : 1/PK
Product Status : Active
- Prepares the ends of PE pipe and tapping tees for electrofusion
- Removes .009 - .012 peel thickness
- Spring actuated blade gives a complete peel, even on out-of-round pipe
- External cutting blade allows for clear observation of the peel removal
- Hardened tool steel cutting blade with two cutting edges for twice the life
- Close fitting mandrel to round pipe that may be oval
- Electrofusion requires the outside diameter of pipe to be clean and free of oxidation. The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion. Its spring-loaded blade does not skip and it keeps consistent pressure on the pipe to yield a smooth, finished surface. The blade completely peels even out-of-round pipe with the help of the close fitting mandrel which rerounds oval pipe. An observation window allows operator to see when the peel is complete by viewing the pipe end in the middle of the window. These tools can be used on the ends of pipe or on tapping tee outlets. Each model is size specific for both pipe size and wall thickness. The PE pipe peeler blade may be rotated 180 degrees to provide a second cutting edge, giving twice the blade life. The True Peel® low profile allows it to be used on tapping tee outlets with limited clearance, unlike conventional peelers with a large swing radius. REED True Peel® pipe scraping tools ship in a protective carrying case.