Starrett® 568C, 4 Pieces, 2 in Dia Round, 1-7/16 in Square, 1-9/16 in Screw at Top, Hardened Steel
For general shop use and layout work, as well as for holding stock in place during light-duty milling, drilling and grinding operation
MFR #: 568C
A&M #: 76377
Starrett
UNSPSC #: 41111600
$760.00 / EACH
Typically ships within 7-10 days.
- See all product specifications
Manufacturer : Starrett
Brand Name : Starrett®
Country Of Origin : US
Dimensions : 2-1/2 in L x 3 in W x 2 in H
Material : Hardened Steel
Number Of Pieces : 4
Package Description : EACH
Standards : PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
Product Status : Active
- V-grooves are ground central and parallel to the sides and base - perfect alignment in matched pairs
- Clamps have screw holes at 45 Deg and 90 Deg to hold either square or round work
- Stepped groove construction permits high or low clamp mounting or small or large work
- Clamps do not project over the width of the block, permitting it to be used on the base, ends or sides
- 3/8-16 tapped holes permit mounting blocks on faceplates or angle irons
- Starrett V-Blocks come in a variety of styles to suit the numerous requirements of machinists. They are for general shop use and layout work, as well as for holding stock in place during light-duty milling, drilling, and grinding operations. All clamp screws have a hole to help secure the workpiece. V-Blocks (2) and Clamps (Matched Pair).