Starrett® 91B 91 Series Tap Wrench, 3/16 to 1/2 in Tap, Non-Ratcheting, Tool Steel, 9 in L, Bar Handle
For used to tap workpieces
MFR #: 91B
A&M #: 66173
Starrett
UNSPSC #: 27111700
$109.00 / EACH
Typically ships within 7-10 days.
- See all product specifications
Manufacturer : Starrett
Brand Name : Starrett®
Country Of Origin : CN
Finish : Nickel Plated
Handle Type : Bar
Length : 9 in
Package Description : EACH
Standards : PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
Product Status : Active
- Strong and well-proportioned
- Tempered gripping surfaces firmly hold square or round shanks
- Plunger operated by knurled sleeve
- Spring inside sleeve causes plunger to back off when pressure is removed
- Round shanks can be gripped, but care must be used
- Excessive pressure may break the moveable V-jaw
- The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 9" (225mm) Length, 3/16-1/2" (4.7-12.7mm) Tap Size.