Starrett® 1100-18-1 1100 Series Heavy Duty Dial Indicator Diameter Gage, 12 to 18 in, 0.0001 in
For used to measure both outside and inside diameters by comparing dimensions to gage blocks or an adjustable setting master
MFR #: 1100-18-1
A&M #: 5627900
Starrett
UNSPSC #: 41111630
$4,039.00 / EACH
Out of Stock.This item has been discontinued by the manufacturer. Please request a quote or call 800.864.2660 for help identifying a suitable substitution.
- See all product specifications
Manufacturer : Starrett
Brand Name : Starrett®
Country Of Origin : US
Graduations : 0.0001 in
Measuring Range : 12 to 18 in
Package Height : 30.9 in
Standards : PROP65: This product can expose you to chemicals including: Diisononyl phthalate (DINP)/which is known to the State of California to cause cancer and Di-isodecyl phthalate (DIDP)/which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Status : Discontinued
- The dial has a double row of graduations reading in opposite directions - minus in red and plus in black
- The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
- There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
- Gage depth is set by adjusting the gage feet up or down
- A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
- The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
- Unless otherwise specified, the dial indicator sent with the gage reads in 0.0005 in increments with a total range of +/- 0.03 in