Starrett® 252Z-14 Height Transfer Gage With Wood Case, 0 to 14 in, 5-3/4 in Base
MFR #: 252Z-14
A&M #: 5627745
Starrett
UNSPSC #: 41111614
$2,229.00 / EACH
Typically ships within 7-10 days.
- See all product specifications
Manufacturer : Starrett
Base Length : 5-3/4 in
Brand Name : Starrett®
Country Of Origin : US
Dimensions : 15-41/64 in L x 3-1/2 in W x 5-3/4 in H
Material : Steel
Package Description : EACH
Standards : PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
Product Status : Active
- Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
- Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
- Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, that is heat or hand pressure
- Hand-fitting base design for sure-grip handling and easy movement
- Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
- Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
- Thumb screw allows slide to be locked
- Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
- A snug on the slide provides two holes (.375 in 9.5mm and .156 in 4mm) for holding gage rods or scribers
- The rod has a major diameter of .375 in (9.5mm) and stepped diameters of 1/4 in (3.2mm) and 7/32 in (5.5mm) at one end and 5/16 in (8mm) at the opposite end
- The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards. 0-14" (350mm) Range.