Starrett® 683-3Z Internal Chamfer Gage, 0 to 1 in Measuring, Graduations 0.001 in, 3-Blade Plunger, 2-19/64 in Dia x 57/64 in H Dial, Hardened Tool Steel
MFR #: 683-3Z
A&M #: 275527
Starrett
UNSPSC #: 41111600
$542.00 / EACH
Typically ships within 7-10 days.
- See all product specifications
Manufacturer : Starrett
Brand Name : Starrett®
Country Of Origin : US
Dial Color : White
Dial Size : 2-19/64 in Dia x 57/64 in H
Graduations : 0.001 in
Package Description : EACH
Standards : PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
Product Status : Active
- When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
- No setting master is necessary
- Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
- Gages are also available with electronic indicators on request
- Deluxe Padded Case
- All ground surfaces are of hardened tool steel
- These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-1" Range In case of wear, the gage may be adjusted to read the proper number.