Starrett® 683M-3Z Internal Chamfer Gage, 0 to 25 mm Measuring, Graduations 0.02 mm, 3-Blade Plunger, 7/8 in Dia Dial, Hardened Tool Steel
MFR #: 683M-3Z
A&M #: 5626604
Starrett
UNSPSC #: 41111600
$589.00 / EACH
Out of Stock.This item has been discontinued by the manufacturer. Please request a quote or call 800.864.2660 for help identifying a suitable substitution.
- See all product specifications
Manufacturer : Starrett
Brand Name : Starrett®
Country Of Origin : US
Dial Color : Yellow
Dial Size : 7/8 in Dia
Graduations : 0.02 mm
Package Description : EACH
Standards : PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
Product Status : Discontinued
- When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
- No setting master is necessary
- gages will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gage
- Gages are also available with electronic indicators on request
- Deluxe Padded Case
- All ground surfaces are of hardened tool steel
- These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-25mm Range In case of wear, the gage may be adjusted to read the proper number.