Starrett® 683M-4Z Internal Chamfer Gage, 25 to 50 mm Measuring, Graduations 0.02 mm, 3-Blade Plunger, 2-19/64 in Dia x 57/64 in H Dial, Hardened Tool Steel
MFR #: 683M-4Z
A&M #: 5626605
Starrett
UNSPSC #: 41111600
$775.00 / EACH
Out of Stock.This item has been discontinued by the manufacturer. Please request a quote or call 800.864.2660 for help identifying a suitable substitution.
- See all product specifications
Manufacturer : Starrett
Brand Name : Starrett®
Country Of Origin : US
Dial Color : Yellow
Dial Size : 2-19/64 in Dia x 57/64 in H
Graduations : 0.02 mm
Package Description : 1/PK
Standards : PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
Product Status : Discontinued
- When the three blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
- No setting master is necessary
- Gages will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gage
- Gages are also available with electronic indicators on request
- Deluxe padded case
- All ground surfaces are of hardened tool steel
- Indicators are AGD design
- Gages directly measure the diameter of chamfered holes
- For 0 - 90 deg Dial reading
- These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 25 - 50 mm range in case of wear, the gage may be adjusted to read the proper number.