main | YG-1 Tool | Milling Inserts

Milling Inserts

FILTER

: Stocked Items Only
: ADKT1505UM YG602 (1)
AOMT123604PDTR YG602 (1)
AOMT123608PDTR YG602 (1)
APGT160408-AL (1)
APKT100305AL YG2002 (1)
APKT100305PDTRYG622 (1)
APKT100305ST YG602 (1)
APKT100308-ST (1)
APKT100308PDTR (1)
APKT100308PDTR YG602 (1)
: YG-1 (222)
: AL (6)
GN (2)
GW (7)
M (2)
PDTR (5)
PW (4)
ST (12)
TI (1)
TN (1)
TR (13)
: 0.0156 in (2)
0.016 in (2)
0.0196 in (4)
0.031 in (11)
0.032 in (7)
0.047 in (3)
0.063 in (1)
0.075 in (4)
0.094 in (1)
1/16 in (14)
: KR (222)
: CVD-TiCN-Al2O3 Coated (2)
CVD-TiCN/Al2O3 Coated (1)
DLC Coated (39)
H Coated (19)
PVD Coated (2)
PVD-AlCrN Coated (18)
PVD-AlTiCrN Coated (5)
PVD-TiAlN Coated (93)
TiAlN Coated (39)
Uncoated (4)
: Ambidextrous (1)
Neutral (31)
Right (132)
Right Hand (32)
: ADKT1505UM YG602 (1)
AOMT123604PDTR YG602 (1)
AOMT123608PDTR YG602 (1)
APGT160408-AL (1)
APKT100305-AL YG2002 (1)
APKT100305-ST YG602 (1)
APKT100305PDTR (1)
APKT100308-ST (1)
APKT100308PDTR (3)
APKT100308PDTR YG602 (1)
: 0.001 in (2)
0.002 in (17)
0.003 in (8)
0.004 in (3)
0.197 in (1)
0.244 in (2)
0.248 in (2)
0.26 in (2)
0.264 in (4)
0.315 in (5)
: #0501M0 (1)
#0604 (2)
#0702M0 (1)
#0802M0 (2)
#080608 (1)
#100305 (1)
#100308 (2)
#1003M0 (1)
#10T3M0 (2)
#1204 (1)
: ADKT (1)
AOMT (2)
APKT (28)
APMT (4)
ENMX (9)
ODMT (1)
ODMW (1)
OFER (1)
OFMT (1)
ONMU (4)
: 45 deg (7)
75 deg (4)
90 deg (12)
: 0.157 in (1)
0.3898 in (3)
0.390 in (2)
0.528 in (3)
0.5478 in (1)
0.598 in (6)
0.5984 in (6)
0.65 in (1)
0.866 in (2)
1/2 in (25)
: YG2002 (2)
YG50 (4)
YG501 (2)
YG5020 (3)
YG602 (67)
YG603 (1)
YG613 (9)
YG622 (18)
YG712 (5)
YG713 (14)
: Carbide (222)
: Aluminum and Non-Ferrous Metal (3)
Cast Iron, Non-Ferrous Metals and Steel (97)
Ferritic Stainless Steel, Martensitic Stainless Steel and Austenitic Stainless Steel (1)
Gray Cast Iron and Nodular Cast Iron (2)
Low Steel, High Steel and Non-Alloyed Steel (23)
Low Steel, High Steel, Non-Alloyed Steel, Ferritic Stainless Steel, Martensitic Stainless Steel, Austenitic Stainless Steel, Gray Cast Iron, Nodular Cast Iron and Hard Material (2)
Low Steel, High Steel, Non-Alloyed Steel, Ferritic Stainless Steel, Martensitic Stainless Steel, Austenitic Stainless Steel, Gray Cast Iron, Nodular Cast Iron, Super Alloy and Titanium Alloy and Hard Material (10)
Low Steel, High Steel, Non-Alloyed Steel, Gray Cast Iron, Nodular Cast Iron and Hard Material (2)
Non-ferrous Metals (2)
Steel, Stainless Steel, Cast Iron, Heat Resistant Super Alloy and Hardened Material (50)
: K (5)
M (1)
M, S (9)
N (4)
P (25)
P, H (11)
P, K, H (2)
P, K, N (97)
P, M, K, H (6)
P, M, K, S, H (10)
: 0.39 in (10)
0.63 in (202)
0.75 in (10)
: 1.75 in (97)
3.86 in (10)
4 in (105)
5.62 in (10)
: 0.01 lb (11)
0.02 lb (27)
0.03 lb (16)
0.04 lb (5)
0.05 lb (14)
0.06 lb (4)
0.07 lb (7)
0.08 lb (30)
0.09 lb (5)
0.11 lb (4)
: 0.59 in (10)
1.63 in (97)
1.75 in (105)
2.38 in (10)
: Negative (3)
Positive (79)
: XB1A Series (7)
XB1D Series (7)
XB1N Series (8)
XB2C Series (7)
XB2N Series (8)
XBAD Series (8)
XR1A Series (24)
XR1D Series (24)
XR2A Series (4)
: 80 deg Parallelogram (17)
Octagon (4)
Octagonal (4)
Parallelogram (18)
Pentagon (5)
Round (36)
Square (15)
Squared (6)
Triangular (11)
: 0.055 in (1)
0.094 in (13)
0.106 in (11)
0.109 in (1)
0.122 in (1)
0.125 in (2)
0.126 in (10)
0.138 in (2)
0.142 in (8)
0.156 in (1)
: 1-Cutting Edge (97)
16-Cutting Edge (1)
2-Corner Imperial (3)
2-Cutting Edge (10)
3-Cutting Edge (2)
4-Corner Imperial (3)
4-Cutting Edge (10)
4-Cutting Edge High Feed (5)
Imperial (46)
: 0.1969 in (1)
0.264 in (3)
0.2756 in (1)
0.315 in (2)
0.362 in (1)
0.37 in (6)
0.3937 in (3)
0.4724 in (7)
0.528 in (4)
0.6299 in (1)