Spirax Sarco 0233100, CS10-1 Clean Steam Separator, 1 in, 110 psig
MFR #: 233100
A&M #: 4946798
Spirax-Sarco Inc
UNSPSC #: 40161700
$16,773.75 / EACH
Typically ships within 7-10 days.
Manufacturer : Spirax-Sarco Inc
Standards : ASTM A312 316L/A240 316L/A276 316L Body|EN 10204 3.1
Product Status : Active
- Maximum allowable pressure: 145 psig at 122 deg F
- Maximum allowable temperature: 482 deg F
- 0.5 um in Ra internal
- PN10 Body design conditions
- Maximum operating pressure for saturated steam service 110 psig
- Designed for a maximum cold hydraulic test pressure of 217 psig
- Even in the cleanest and best designed clean steam system entrained moisture can still occur, resulting in an unacceptably low dryness fraction, non-compliance of critical sterilization standards, damage to control valves / instrumentation and a generally low efficiency of the system. The CS10-1 clean steam separator has been designed in full accordance with the ASME BPE guide to overcome the issues of removing entrained moisture from clean and pure steam systems. It has also been designed with the feature of a removable baffle plate, allowing the unit to be fully inspected prior to installation and to facilitate system internal inspection.