Ball End Mills

FILTER

1257 items
content loaded
Emuge 1877A.001 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 4 mm Dia Shank, 40 mm OAL, TiAlN
Emuge 1877A.001 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 4 mm Dia Shank, 40 mm OAL, TiAlN
MFR #: 1877A.001
A&M #: 6251429
Emuge-Franken
$165.72 / EACH
Emuge 1877A.00106 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
Emuge 1877A.00106 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
MFR #: 1877A.00106
A&M #: 6251430
Emuge-Franken
$191.62 / EACH
Emuge 1877A.0015 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1.5 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 4 mm Dia Shank, 40 mm OAL, TiAlN
Emuge 1877A.0015 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1.5 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 4 mm Dia Shank, 40 mm OAL, TiAlN
MFR #: 1877A.0015
A&M #: 6251431
Emuge-Franken
$165.72 / EACH
Emuge 1877A.001506 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1.5 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
Emuge 1877A.001506 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1.5 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
MFR #: 1877A.001506
A&M #: 6251432
Emuge-Franken
$189.08 / EACH
Emuge 1877A.002 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 2 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
Emuge 1877A.002 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 2 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
MFR #: 1877A.002
A&M #: 6251433
Emuge-Franken
$165.72 / EACH
Emuge 1877A.003 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 3 mm Dia Cutter, 5 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
Emuge 1877A.003 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 3 mm Dia Cutter, 5 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
MFR #: 1877A.003
A&M #: 6251434
Emuge-Franken
$165.72 / EACH
Emuge 1877A.004 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 4 mm Dia Cutter, 8 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
Emuge 1877A.004 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 4 mm Dia Cutter, 8 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
MFR #: 1877A.004
A&M #: 6251435
Emuge-Franken
$165.72 / EACH
Emuge 1877A.005 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 5 mm Dia Cutter, 9 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
Emuge 1877A.005 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 5 mm Dia Cutter, 9 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
MFR #: 1877A.005
A&M #: 6251436
Emuge-Franken
$165.72 / EACH
Emuge 1877A.006 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
Emuge 1877A.006 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
MFR #: 1877A.006
A&M #: 6251437
Emuge-Franken
$165.72 / EACH
Emuge 1877A.001 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 4 mm Dia Shank, 40 mm OAL, TiAlN
Emuge 1877A.001 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 4 mm Dia Shank, 40 mm OAL, TiAlN
MFR #: 1877A.001
A&M #: 6251429
Emuge-Franken
$165.72 / EACH
Emuge 1877A.00106 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
Emuge 1877A.00106 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
MFR #: 1877A.00106
A&M #: 6251430
Emuge-Franken
$191.62 / EACH
Emuge 1877A.0015 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1.5 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 4 mm Dia Shank, 40 mm OAL, TiAlN
Emuge 1877A.0015 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1.5 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 4 mm Dia Shank, 40 mm OAL, TiAlN
MFR #: 1877A.0015
A&M #: 6251431
Emuge-Franken
$165.72 / EACH
Emuge 1877A.001506 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1.5 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
Emuge 1877A.001506 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 1.5 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
MFR #: 1877A.001506
A&M #: 6251432
Emuge-Franken
$189.08 / EACH
Emuge 1877A.002 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 2 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
Emuge 1877A.002 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 2 mm Dia Cutter, 4 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
MFR #: 1877A.002
A&M #: 6251433
Emuge-Franken
$165.72 / EACH
Emuge 1877A.003 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 3 mm Dia Cutter, 5 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
Emuge 1877A.003 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 3 mm Dia Cutter, 5 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 50 mm OAL, TiAlN
MFR #: 1877A.003
A&M #: 6251434
Emuge-Franken
$165.72 / EACH
Emuge 1877A.004 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 4 mm Dia Cutter, 8 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
Emuge 1877A.004 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 4 mm Dia Cutter, 8 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
MFR #: 1877A.004
A&M #: 6251435
Emuge-Franken
$165.72 / EACH
Emuge 1877A.005 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 5 mm Dia Cutter, 9 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
Emuge 1877A.005 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 5 mm Dia Cutter, 9 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
MFR #: 1877A.005
A&M #: 6251436
Emuge-Franken
$165.72 / EACH
Emuge 1877A.006 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
Emuge 1877A.006 Hard-Cut 1877A Extra Short Length Ball Nose End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 2 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN
MFR #: 1877A.006
A&M #: 6251437
Emuge-Franken
$165.72 / EACH

Company Information

About A&M Industrial
About A&M Robotics
About A&M VMI
Career Opportunities
Corporate Social Responsibility
Locations
Press Releases

Customer Care

Account Center
Invoicing & Credit
Request a Quote
Request A Service
Returns
Terms Of Use

More Ways To Shop

Material Handling Catalog
Metalworking Catalog
Safety Catalog
All Sales & Promotions
Contact Us
800.864.2660
Connect With Us

Access exclusive offers & industry news

© A&M Industrial

|

Privacy Policy
|

Compliance
|

Conflict Minerals Policy
|

Prop 65

|

Site Map