Square End Mills

FILTER

: Stocked Items Only
: Cut & Form® (5)
Emuge (1259)
: DE (1010)
US (253)
: 0.2 mm (6)
0.3 mm (1)
0.5 mm (10)
0.6 mm (1)
0.8 mm (6)
1 in (48)
1 mm (11)
1.2 mm (1)
1.3 mm (1)
1.4 mm (1)
: Right Hand (1256)
: AlCr (363)
CrN (34)
Diamond (14)
GLT (38)
TiAlN (576)
TiN/TiAlN (146)
Uncoated (93)
: Spiral (654)
: 15 deg (11)
20/30 deg (3)
30 deg (50)
34/38 deg (124)
35-38 deg (62)
35/37 deg (22)
35/38 deg (285)
38 deg (7)
38/40 deg (52)
38/42 deg (179)
: 0.12 mm (1)
0.2 mm (5)
0.3 mm (1)
0.36 mm (1)
0.48 mm (1)
0.5 mm (5)
0.6 mm (1)
0.8 mm (5)
0.875 in (1)
0.9 mm (1)
: CBN (9)
Carbide (1255)
: 10 (6)
12 (3)
16 (3)
18 (1)
2 (156)
20 (2)
3 (308)
3/6 (8)
4 (449)
5 (157)
: 1-1/2 in (7)
100 mm (4)
102 mm (2)
104 mm (38)
105 mm (2)
107 mm (7)
108 mm (19)
110 mm (6)
112 mm (3)
114 mm (1)
: 0.4 in (436)
0.5 in (170)
0.75 in (137)
1 in (368)
1.4 in (32)
2 in (3)
: 3.5 in (436)
4.5 in (170)
5 in (283)
6 in (254)
8 in (3)
: 0.01 lb (58)
0.02 lb (3)
0.03 lb (15)
0.04 lb (213)
0.05 lb (86)
0.06 lb (26)
0.07 lb (1)
0.08 lb (39)
0.09 lb (46)
0.1 lb (87)
: 0.4 in (436)
0.5 in (170)
0.75 in (137)
1 in (368)
1.4 in (32)
2 in (3)
: 1825A (1)
1916A (4)
1917A (5)
1931 (1)
1931A (5)
1932 (1)
1932A (5)
1998A (9)
1999A (9)
2510A (16)
: 1 in (45)
1/2 in (70)
1/4 in (53)
1/8 in (11)
10 mm (95)
12 mm (91)
14 mm (22)
16 mm (85)
18 mm (14)
20 mm (103)
: Cylindrical (659)
Weldon Flat (604)
: Extra Length (115)
Extra Length Multi-Flute (12)
Extra Long Length (50)
Long Length (148)
Multi-Flute (14)
Multi-Tooth (12)
Short Length (3)
Standard Length (187)
Stub Length (206)
Trochoidal (24)

Sort by

Results Per Page

1264 items

content loaded

Cut & Form® 2506.006 Cut and Form 2506 Stub Length Square End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 3/6 Flutes, 6 mm Dia Shank, 54 mm OAL, Uncoated

Compare

Cut & Form® 2506.006 Cut and Form 2506 Stub Length Square End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 3/6 Flutes, 6 mm Dia Shank, 54 mm OAL, Uncoated

MFR #: 2506.006

A&M #: 6258517

Emuge-Franken

$174.21 / EACH

QTY

Cut & Form® 2506.008 Cut and Form 2506 Stub Length Square End Mill, 8 mm Dia Cutter, 12 mm Length of Cut, 3/6 Flutes, 8 mm Dia Shank, 58 mm OAL, Uncoated

Compare

Cut & Form® 2506.008 Cut and Form 2506 Stub Length Square End Mill, 8 mm Dia Cutter, 12 mm Length of Cut, 3/6 Flutes, 8 mm Dia Shank, 58 mm OAL, Uncoated

MFR #: 2506.008

A&M #: 6258518

Emuge-Franken

$216.24 / EACH

QTY

Cut & Form® 2506.012 Cut and Form 2506 Stub Length Square End Mill, 12 mm Dia Cutter, 16 mm Length of Cut, 3/6 Flutes, 12 mm Dia Shank, 73 mm OAL, Uncoated

Compare

Cut & Form® 2506.012 Cut and Form 2506 Stub Length Square End Mill, 12 mm Dia Cutter, 16 mm Length of Cut, 3/6 Flutes, 12 mm Dia Shank, 73 mm OAL, Uncoated

MFR #: 2506.012

A&M #: 6258520

Emuge-Franken

$287.40 / EACH

QTY

Cut & Form® 2507.008 Cut and Form 2507 Standard Length Square End Mill, 8 mm Dia Cutter, 19 mm Length of Cut, 3/6 Flutes, 8 mm Dia Shank, 63 mm OAL, Uncoated

Compare

Cut & Form® 2507.008 Cut and Form 2507 Standard Length Square End Mill, 8 mm Dia Cutter, 19 mm Length of Cut, 3/6 Flutes, 8 mm Dia Shank, 63 mm OAL, Uncoated

MFR #: 2507.008

A&M #: 6258522

Emuge-Franken

$240.83 / EACH

QTY

Cut & Form® 2507.012 Cut and Form 2507 Standard Length Square End Mill, 12 mm Dia Cutter, 26 mm Length of Cut, 3/6 Flutes, 12 mm Dia Shank, 83 mm OAL, Uncoated

Compare

Cut & Form® 2507.012 Cut and Form 2507 Standard Length Square End Mill, 12 mm Dia Cutter, 26 mm Length of Cut, 3/6 Flutes, 12 mm Dia Shank, 83 mm OAL, Uncoated

MFR #: 2507.012

A&M #: 6258524

Emuge-Franken

$321.90 / EACH

QTY

Emuge 1825A.005 Hard-Cut 1825A Stub Length Square End Mill, 5 mm Dia Cutter, 9 mm Length of Cut, 6 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN

Compare

Emuge 1825A.005 Hard-Cut 1825A Stub Length Square End Mill, 5 mm Dia Cutter, 9 mm Length of Cut, 6 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN

MFR #: 1825A.005

A&M #: 6251424

Emuge-Franken

$159.61 / EACH

QTY

Emuge 1825A.006 Hard-Cut 1825A Stub Length Square End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 6 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN

Compare

Emuge 1825A.006 Hard-Cut 1825A Stub Length Square End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 6 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN

MFR #: 1825A.006

A&M #: 6251425

Emuge-Franken

$156.76 / EACH

QTY

Emuge 1825A.008 Hard-Cut 1825A Stub Length Square End Mill, 8 mm Dia Cutter, 12 mm Length of Cut, 6 Flutes, 8 mm Dia Shank, 58 mm OAL, TiAlN

Compare

Emuge 1825A.008 Hard-Cut 1825A Stub Length Square End Mill, 8 mm Dia Cutter, 12 mm Length of Cut, 6 Flutes, 8 mm Dia Shank, 58 mm OAL, TiAlN

MFR #: 1825A.008

A&M #: 6251426

Emuge-Franken

$193.57 / EACH

QTY

Emuge 1825A.010 1825A Stub Length End Mill, 10 mm Dia Cutter, 14 mm Length of Cut, (6) Flutes, 10 mm Dia Shank, 66 mm OAL, TiAlN

Compare

Emuge 1825A.010 1825A Stub Length End Mill, 10 mm Dia Cutter, 14 mm Length of Cut, (6) Flutes, 10 mm Dia Shank, 66 mm OAL, TiAlN

MFR #: 1825A.010

A&M #: 7191567

Emuge-Franken

$281.54 / EACH

QTY

Cut & Form® 2506.006 Cut and Form 2506 Stub Length Square End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 3/6 Flutes, 6 mm Dia Shank, 54 mm OAL, Uncoated

Compare

Cut & Form® 2506.006 Cut and Form 2506 Stub Length Square End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 3/6 Flutes, 6 mm Dia Shank, 54 mm OAL, Uncoated

MFR #: 2506.006

A&M #: 6258517

Emuge-Franken

$174.21 / EACH

QTY

Cut & Form® 2506.008 Cut and Form 2506 Stub Length Square End Mill, 8 mm Dia Cutter, 12 mm Length of Cut, 3/6 Flutes, 8 mm Dia Shank, 58 mm OAL, Uncoated

Compare

Cut & Form® 2506.008 Cut and Form 2506 Stub Length Square End Mill, 8 mm Dia Cutter, 12 mm Length of Cut, 3/6 Flutes, 8 mm Dia Shank, 58 mm OAL, Uncoated

MFR #: 2506.008

A&M #: 6258518

Emuge-Franken

$216.24 / EACH

QTY

Cut & Form® 2506.012 Cut and Form 2506 Stub Length Square End Mill, 12 mm Dia Cutter, 16 mm Length of Cut, 3/6 Flutes, 12 mm Dia Shank, 73 mm OAL, Uncoated

Compare

Cut & Form® 2506.012 Cut and Form 2506 Stub Length Square End Mill, 12 mm Dia Cutter, 16 mm Length of Cut, 3/6 Flutes, 12 mm Dia Shank, 73 mm OAL, Uncoated

MFR #: 2506.012

A&M #: 6258520

Emuge-Franken

$287.40 / EACH

QTY

Cut & Form® 2507.008 Cut and Form 2507 Standard Length Square End Mill, 8 mm Dia Cutter, 19 mm Length of Cut, 3/6 Flutes, 8 mm Dia Shank, 63 mm OAL, Uncoated

Compare

Cut & Form® 2507.008 Cut and Form 2507 Standard Length Square End Mill, 8 mm Dia Cutter, 19 mm Length of Cut, 3/6 Flutes, 8 mm Dia Shank, 63 mm OAL, Uncoated

MFR #: 2507.008

A&M #: 6258522

Emuge-Franken

$240.83 / EACH

QTY

Cut & Form® 2507.012 Cut and Form 2507 Standard Length Square End Mill, 12 mm Dia Cutter, 26 mm Length of Cut, 3/6 Flutes, 12 mm Dia Shank, 83 mm OAL, Uncoated

Compare

Cut & Form® 2507.012 Cut and Form 2507 Standard Length Square End Mill, 12 mm Dia Cutter, 26 mm Length of Cut, 3/6 Flutes, 12 mm Dia Shank, 83 mm OAL, Uncoated

MFR #: 2507.012

A&M #: 6258524

Emuge-Franken

$321.90 / EACH

QTY

Emuge 1825A.005 Hard-Cut 1825A Stub Length Square End Mill, 5 mm Dia Cutter, 9 mm Length of Cut, 6 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN

Compare

Emuge 1825A.005 Hard-Cut 1825A Stub Length Square End Mill, 5 mm Dia Cutter, 9 mm Length of Cut, 6 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN

MFR #: 1825A.005

A&M #: 6251424

Emuge-Franken

$159.61 / EACH

QTY

Emuge 1825A.006 Hard-Cut 1825A Stub Length Square End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 6 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN

Compare

Emuge 1825A.006 Hard-Cut 1825A Stub Length Square End Mill, 6 mm Dia Cutter, 10 mm Length of Cut, 6 Flutes, 6 mm Dia Shank, 54 mm OAL, TiAlN

MFR #: 1825A.006

A&M #: 6251425

Emuge-Franken

$156.76 / EACH

QTY

Emuge 1825A.008 Hard-Cut 1825A Stub Length Square End Mill, 8 mm Dia Cutter, 12 mm Length of Cut, 6 Flutes, 8 mm Dia Shank, 58 mm OAL, TiAlN

Compare

Emuge 1825A.008 Hard-Cut 1825A Stub Length Square End Mill, 8 mm Dia Cutter, 12 mm Length of Cut, 6 Flutes, 8 mm Dia Shank, 58 mm OAL, TiAlN

MFR #: 1825A.008

A&M #: 6251426

Emuge-Franken

$193.57 / EACH

QTY

Emuge 1825A.010 1825A Stub Length End Mill, 10 mm Dia Cutter, 14 mm Length of Cut, (6) Flutes, 10 mm Dia Shank, 66 mm OAL, TiAlN

Compare

Emuge 1825A.010 1825A Stub Length End Mill, 10 mm Dia Cutter, 14 mm Length of Cut, (6) Flutes, 10 mm Dia Shank, 66 mm OAL, TiAlN

MFR #: 1825A.010

A&M #: 7191567

Emuge-Franken

$281.54 / EACH

QTY

Results Per Page