M.A. Ford® Cyclone CXDCE2500AP Double Margin Drill With Coolant Feed, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, Straight Shank, 15X D Cutting, 2 Flutes
MFR #: CXDCE2500AP
A&M #: 4964899
M.A. Ford
UNSPSC #: 23241605
$628.36 / EACH
Regular Price: $661.43, you save $33.07 (5%)Typically ships within 3-5 days.
- See all product specifications
Manufacturer : M.A. Ford
Applicable Materials : Cast Iron, High Temperature Alloy, Steel and Stainless Steel
Brand Name : M.A. Ford®
Country Of Origin : US
Cutting Depth : 15X
Cutting Direction : Right Hand
Standards : PROP65: This product can expose you to chemicals including nickel, cobalt, and lead, which are known to the State of California to cause cancer, and chemicals including lead which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Status : Active
- Corner chamfer for added corner strength and improved finish
- Common shank
- Modified margin relief for improved performance in deep hole drilling
- ALtima® Plus is a multi-layer AlTiN coating that provides higher heat resistance, longer tool life and reduces chipping and wear
- Enhanced double margin design for quicker engagement in the hole, improved hole finish and improved location when drilling cross holes. Enhanced surface finish technology pre coating improves coating adhesion. Enhanced surface finish technology post coating improves chip evacuation. Refined edge protection.